home *** CD-ROM | disk | FTP | other *** search
- - M-80 -
-
-
- Little do you know it is very simple to make an M-80. Find a
- cardboard tube about 2 mm thick about 3 1/2 inches long and a space in
- the inside about 1/2 an inch. Take the tube and pour plaster about one
- fourth the way down the tube. Let it dry. Then make a hole on top just
- big enough for the fuse, so the fuse will fit nice and tight. Then pour
- your powder in until you have about one fourth of the tube left for the
- plaster on the other end. I recomend using a smokeless powder that burns
- really fast. This way its more likely to fire. If you use flash powder
- it might not go off. make sure you insert the fuse into the hole before
- you poor in the powder. The powder must be packed in tight. Then place
- a peice of paper on the powder so the plaster does not ruin it. Then pour
- the plaster in filling the rest of the container. Then let it dry for at
- LEAST 3 - 4 days. Then light and run. If you foolowed the steps above
- correctly then it should work great.
-
-
-
- -----=====>Vortex